What is the coverage of MAPEI AquaDefense?
Product Details. 1 gal. bucket offers coverage up to 60 sq. ft.
Does MAPEI AquaDefense need a primer?
Mapelastic AquaDefense Tanking Kit components are supplied ready to use, and areas can be ready to tile after just 4 hours without the need to prime.
Can I tile over AquaDefense?
Mapelastic AquaDefense can be flood-tested after 12 hours of drying time, is IAPMO-listed for use as a shower-pan liner, and exceeds ANSI A118. 10 and ANSI A118. 12 standards. Very quick drying: Install tile after 30 to 50 minutes of drying time.
Can I use MAPEI AquaDefense on drywall?
No, Mapei does not recommend, authorize, or warrant Aquadefense over gypsum board in wet areas.
How many coats of AquaDefense do you need?
two
APPLICATION OF THE PRODUCT Mapelastic AquaDefense must be applied in two even, coats (approx. 0.4 mm per coat) with a long-haired roller, brush or trowel.
Can you use AquaDefense on concrete?
MAPELASTIC AQUADEFENSE Can be tiled after 4 hours. For use on screed, render, concrete, plywood and ceramic finishes.
Does MAPEI AquaDefense smell?
No odor: Great for confined spaces The advanced technology of the quick-drying, liquid-rubber formula remains the same.
What mortar do you use over AquaDefense?
MAPEI polymer
Mapelastic AquaDefense dries after about 30 to 50 minutes and is then ready to receive any MAPEI polymer or epoxy mortar.
How long does AquaDefense last?
Shelf life (Mapelastic AquaDefense) 2 years when stored in original unopened container Shelf life (optional Reinforcing Fabric) Unlimited (when stored in original unopened box) Flash point (Seta flash) Nonflammable Color Medium green when wet; dark green when dry Drying time between first and second coats When dark …
How long should I wait between coats of AquaDefense?
Waiting time between first and second coat: approximately 1 hour (at +23°C and 50% R.H.). Waiting time before laying coating: 3-4 hours (at +23°C and 50% R.H.). Times refer to +23°C and 50% relative humidity of the air when the product is applied on dried screeds with a residual moisture lower than 3%.
Can you use MAPEI AquaDefense outside?
MAPELASTIC AQUADEFENSE Ready to use, flexible, ultra rapid drying waterproofing membrane for interior and exterior use in showers, wet rooms and on balconies*.
How many layers does AquaDefense have?
All corners should be pre-treated with at least 2 coats of MAPEI’s Mapelastic AquaDefense. MAPEI recommends an additional 2 coats of Mapelastic AquaDefense in the main field areas plus corners. So, there should be at least 4 coats of Mapelastic AquaDefense on corners upon completion.
Do I need two coats of AquaDefense?
How many coats of Mapelastic® AquaDefense are required? All corners should be pre-treated with at least 2 coats of MAPEI’s Mapelastic AquaDefense. MAPEI recommends an additional 2 coats of Mapelastic AquaDefense in the main field areas plus corners.