Menu Close

What can I use to waterproof my foundation?

What can I use to waterproof my foundation?

The Best Approach to Waterproofing New Foundation Walls is Poly Wall® Waterproofing Barrier Systems. Applying Poly Wall® below-grade waterproofing systems to any foundation wall with earth on one side and usable space on the other (including crawl spaces) significantly minimizes moisture-related problems to your home.

How can I waterproof my existing foundation wall?

DO apply a masonry waterproofing product to bare interior basement walls. If your foil test showed that water is soaking through your basement walls and leaving them wet, seal the interior of the walls with a high-quality waterproof paint, such as DRYLOK White Extreme Waterproofer (available from Home Depot).

How much does it cost to waterproof a foundation exterior?

Basement Waterproofing Cost

National Average Cost $4,118
Minimum Cost $250
Maximum Cost $20,000
Average Range $1,920 to $6,320

Can you use Drylok on exterior walls?

Yes, DRYLOK® can be applied to interior and exterior masonry surfaces – above or below grade.

How do you waterproof a concrete exterior wall?

For the best method for sealing concrete block walls and the best cinder block water barrier, read on.

  1. Apply a Coating Directly On the Bare Wall.
  2. Use a Breathable / Permeable Barrier.
  3. Use a Weather-Resistant Elastomeric Layer.
  4. Use “The Pink Stuff”
  5. Repair Cracks and Fill Voids First.
  6. Install an Air and Moisture Barrier.

Is there anything better than Drylok?

per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.

Can you use Drylok outside?

DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside.

Is Parging waterproof?

Parging itself isn’t specifically waterproof, but it can be immensely beneficial to the overall waterproofing process. Adding a layer of parging to the outside of your home’s foundation walls will provide an extra barrier for any water-proofing membranes or coatings applied.

How do you seal concrete around a house foundation?

Seal cracks in concrete with durable urethane caulk. It’ll keep water out and protect your foundation and walks from further cracking and eroding. You can do it in less than a half hour.

What do you use to seal concrete foundation?

  1. Deep Penetrating Sealer RadonSeal – Free Shipping on 5-Gals.
  2. Concrete Waterproofing Products Membranes – Coatings and More.
  3. SPARTACOTE™ Moisture Vapor Barrier Single-coat, 100% solids, liquid applied 2-part epoxy coating.

What’s the difference between DRYLOK and DRYLOK extreme?

The main difference is that Drylok Extreme has better water resistance than Drylok Original (15 PSI as opposed to 10 PSI). Drylok Extreme is wind resistant, includes biocide, and has a longer warranty. Additionally, the Extreme has a smooth texture, while Drylok Original offers a sandy texture.

Will mold grow on DRYLOK?

The chemical makeup of Drylok paint is a particular food source that mold actually likes (mold also grows on wood and many other similar surfaces as those are food sources as well) so the mold has food in plenty if Drylok is present.

How do you seal a concrete foundation wall?

Interior Waterproofing Your Basement Walls and Basement Floor

  1. Step 1: Clean the Area. First you’ll want to clean up the areas you’ll be waterproofing.
  2. Step 2: Plug Holes.
  3. Step 3: Fill Cracks.
  4. Step 4: Seal Openings.
  5. Step 5: Apply Waterproof Coating.

Which is better DRYLOK or Zinsser?

And to prevent concrete surfaces from this water damage, Zinsser Watertite vs. Drylok debate often comes into play….A Quick Comparison Table.

Specification Zinsser Watertite Drylok
Waterproofing Better Good
Application Little complex and calculative application Easier than Drylok

Can you use DRYLOK on the outside?

Can quikrete be used for parging?

QUIKRETE® Water Resistant Parging Mix (115525) is a Masonry coating and patching of concrete walls for cosmetic. Used For: Concrete block. Concrete & masonry walls.

Posted in Lifehacks