Menu Close

Is it safe to use seatpost adapter?

Is it safe to use seatpost adapter?

As far as safe to use – as long as the shim is at least as long as the minimum seat post insertion required for the frame, in theory you are stressing the frame no more than using the correct diameter seat post. Many frames do require 100mm or more, and many seat post shims are not 100mm.

Are carbon seatposts worth it?

By having a set spring rate, a heavier rider will enjoy a more comfortable ride, while a lighter rider will feel more vibration and big hits. Carbon seatposts also perform much better with more exposed seatpost (2x more flex), which hands the better performance to taller riders.

How much does it cost to raise a bike seat?

Move your saddle down 1 to 2cm at a time until this back and forth stops. Conversely, if it’s easy to pedal smoothly, try going up a few centimetres at a time until you have to start reaching for the pedals. Once you’re reaching, start edging your saddle back down until you find yourself in an ideal starting height.

What happens if a bike frame is too small?

Having too small of a bike places you too far forward on the bike. Sliding your saddle back can help solve this. The first way to do this is to loosen the bolts on the rails of the saddle and slide it back as needed. If you find you can’t slide it back far enough, you can get a seat post that has increased set-back.

What is a seatpost shim for?

A seatpost shim lets you easily fit the 27.2mm diameter ShockStop Seatpost OR Dual-Position Seatpost into your larger seat tube.

What happens if your bike seat is too low?

Knee pain is one of the most common indicators of an incorrect saddle height. Typically, a saddle that is too low will result in pain at the front of the knee, but one that is too high creates pain behind the knee – or in the hamstrings as a result of overextension.

What are the advantages of the integrated seatpost?

Compared to traditional seatposts (image, left) and also modern integrated seatmasts, this engineering masterpiece boosts strength and pedaling efficiency, saves weight, increases compliance a whopping 39% (for maximum comfort), and offers all the adjustability you’ll ever need (no cutting required).

What size seatpost for a 1-3/8” Ti seat tube?

A regular 1-3/8” ti seat tube would need a short lug press-fit and welded into the top to bring down the ID to match a 31.6mm seatpost. The thicker wall of the lug also resists weld distortion from the top tube and seat stay junctions.

Why round inner diameter tube for seatpost?

From a fabrication perspective, using a round inner diameter tube to hold a conventional seatpost is orders of magnitude easier than creating a piece that would match either the inside of outside contour of the aero-shaped seat tube.

Can you extend a seat tube too high?

If you extend a seat tube far above the top tube, for any lightweight tube you need to worry about buckling the rear wall of the tube. But if you make the tube thicker to compensate, the structure gets heavy quick.

Posted in Blog