What does beta mean in microphone?
Beta is the SECOND letter in the Greek alphabet. The Beta 58 was/is the SECOND (improved) version of the SM58. The term Beta evolved into an entire line of Shure products that are a step above the Shure SM line.
What is a Shure Beta 52A used for?
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and “punch”, and delivers studio quality sound even at extremely high sound pressure levels.
What are Shure Beta mics?
The Shure BETA 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.
Is Shure Beta 52 condenser mic?
Instrument microphone stands out as the only side-address, supercardioid condenser microphone designed for professional sound reinforcement.
What is supercardioid microphone?
Supercardioid. A supercardioid mic has a tighter pickup angle than a cardioid, but unlike the cardioid, it offers more side rejection. It is, however, slightly sensitive to sound sources that are directly behind the mic.
What is microphone frequency range?
The frequency range of a microphone is defined as the interval between its upper limiting frequency and its lower limiting frequency. With today’s microphones you can cover a frequency range starting from around 1Hz and reaching up to 140 kHz.
Is Shure mic good for vocals?
The best Shure microphone for most is the Shure SM58 However, it’s capable of capturing good vocals without requiring the use of a gain booster, making it a very straightforward and easy-to-set-up mic. Many people looking to record vocals at home gravitate towards this mic because of its price and ease of use.
How far should overhead mics be?
Place the mic over the side of the cymbal, about an inch or two above, while making sure that it is away from other drum pieces.
What is Ortf mic placement?
ORTF Mic Placement ORTF mic technique uses a “near-coincident” pair of cardioid microphones. Near-coincident means the mic capsules are reasonably close to each other. Alternatively, a coincident pair means the capsules are as close to each other as physically possible, such as in the X/Y mic technique.
What polar pattern does a Shure SM57 have?
cardioid polar pattern
Its tight cardioid polar pattern gives you exceptional isolation. In fact, one of the reasons the Shure SM57 is such a popular snare drum microphone is that you can position it to reject the sound of the nearby hi-hat. But the SM57’s stellar off-axis sound rejection is not only great in the studio.
What is the difference between cardioid and supercardioid?
While the cardioid is least sensitive at the rear (180 degrees off-axis) the least sensitive direction is at 126 degrees off-axis for the supercardioid and 110 degrees for the hypercardioid.
Why is my mic only on the left?
Why Your Recording Only Plays Through The Left Speaker. The most likely reason that you’re only hearing sound out of one speaker is because you’re using a two-channel audio interface and your recording or streaming software is expecting the left signal on input one and the right signal on input two.
What is a Beta 52 microphone used for?
The Beta 52 ® A is a precision-engineered dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and “punch,” and delivers studio quality sound even at extremely high sound pressure levels (SPL).
Can the Kelly Shu™ microphone shock mount be used with the Beta 52®a®?
The KELLY SHU™ Microphone Shock Mount can be used with a Shure® Beta 52®A and/or Beta 56®A Microphone. If your preferred microphone of use is the BETA 52A® or BETA 56A®, it is recommended that the internal mounting option be used by following the guidelines illustrated in this pictorial.
What makes the Beta 52A unique?
An integrated, locking stand adapter simplifies mounting and adjustments. Featuring a modified supercardioid pattern, the Beta 52A exhibits remarkable gain before feedback and excellent off-axis rejection. A hardened, steel mesh grille and die-cast metal construction withstands years of abuse, making it ideal for touring sound reinforcement.