How much horsepower does a 2004 6.0 Powerstroke have?
325 horsepower @ 3,300 rpms
6.0L Powerstroke Specifications
| Engine: | 6.0L Powerstroke |
|---|---|
| Fuel: | Diesel |
| Fuel Tank Size: | 29 Gallon or 38 Gallon Options |
| Horsepower: | 325 horsepower @ 3,300 rpms |
| Torque: | 2003-2004: 560 lb/ft @ 2000 rpms 2005-2007: 570 lb/ft @ 2000 rpms |
What does the high pressure oil pump do on a 6.0 Powerstroke?
The HPOP provides oil volume for the fuel injectors to use and its accompanying injection pressure regulator (IPR), which controls HPOP outlet pressure and is located in the HPOP cover, pressurizes this oil as high as 3,600 psi in stock form.
What is a Ford HPOP?
Description. The High Pressure Oil Pump is known issue for the 6.0L Ford Powerstroke diesel. Whether it’s leaking internal seals or a complete failure, it’s always sooner than expected. But even if your HPOP hasn’t failed yet, the HPOP is considered a wear item and should be replaced on higher mileage trucks.
How much PSI does a 6.0 oil system need to start?
500 psi
Fig. 1 on page 38 shows a simple oil flow schematic for the 6.0L diesel engine. In order for the fuel injectors to operate, a minimum of 500 psi oil pressure is required for start-up.
How much does it cost to replace a high pressure oil pump on a 6.0 Powerstroke?
The average cost for a Ford F-350 Super Duty oil pump replacement is between $1,405 and $1,597. Labor costs are estimated between $734 and $926 while parts are priced at $671.
How much does it cost to replace a high pressure oil pump on a 6.0 Power Stroke?
How do you diagnose a bad oil pump?
There are many symptoms to look for when the oil pump goes bad. Some of the common symptoms are: noise from the valve train, strange noises from the hydraulic lifters, reduced oil pressure, a hotter engine, and a noisy oil pump. What is this? Usually, the oil pump doesn’t get servicing until it actually starts to fail.
What causes a high pressure oil pump to fail?
If the level isn’t high enough, the pump will be forced to deal with the additional friction resulting from insufficient lubrication. This will cause some mechanical problems, including warped pump components, which eventually will lead to complete failure of the pump.
How much HP does a tuned 6.0 Powerstroke have?
’03-07 6.0L Power Stroke Our own testing of custom 6.0L tuning yielded 415-420 hp on the rollers—right smack-dab in the middle of what most folks see. By comparison, off-the-shelf universal tunes typically lay down somewhere between 360 and 380 hp.
How much HP can a 6.0 Powerstroke bottom end handle?
800 hp
Even a decade ago, before PCM tuning was anywhere near as refined as it is now, several 6.0L owners proved the 6.0L’s bottom end could withstand 700-rwhp. Today, a lot of serious enthusiasts conclude that the 800 hp 6.0 Power Stroke range gets you into unchartered waters with a 6.0L.
How much oil pressure does a 6.0 Powerstroke need to start?