Menu Close

What is the difference between an alcove tub and a regular tub?

What is the difference between an alcove tub and a regular tub?

The term alcove doesn’t refer to the shape or size of the bathtub, but the installation. Alcove tubs are unfinished on three sides with the fourth side, usually one of the long sides, finished with a tub apron. The tub gets installed into an alcove section of the bathroom with three of its sides enclosed by a wall.

What is difference between Drop-in and alcove bath tub?

Drop-in bathtubs are installed anywhere a carved out deck or structure is implemented, often times in the center of the bathroom. Alcove bathtubs on the other hand, are installed in a recess, against the wall or an alcove.

What is an alcove style bathtub?

An alcove bathtub β€œis any tub enclosed on three sides by walls,” says Eric Phillips, a plumber and the founder of Dripfina. It’s the most common bathtub installation, according to The Home Depot. You’ll see them in all kinds of properties: houses, apartments, hotels and more. They’re also called recessed bathtubs.

How deep should a bathtub alcove be?

A standard alcove tub will have an average depth of 14-15 inches with a soaking depth of around 9 inches. Most adults could not have their body fully submerged in a standard size tub.

Can you put a free standing tub in an alcove?

We often get asked whether it is suitable to install a freestanding bathtub in an alcove. The answer – absolutely! Freestanding bathtubs have been around for nearly 150 years, and they are still part of every day design.

Can a drop in tub be used in an alcove?

Yes, drop in tubs can be installed in an alcove, but they’re more commonly installed in more open spaces, freestanding or jutting out from a wall. Depending on the size of the bathroom, a drop in tub installed in an alcove may provide less space; one may be able to fit a larger tub into another space in the room.

What is the average height of an alcove bathtub?

14 to 16 inches high
The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high.

What is 3 wall alcove bathtub?

3-wall alcove tub-shower combinations are the most common tub type and are designed to maximize space. The unfinished ends usually get sandwiched between an exterior wall and a handy built-in storage cabinet. A wall-mounted shower is a typical accompaniment. Drop-in tubs are the tub shell only.

What is a three wall alcove tub?

Can I use a drop in tub in an alcove?

Do you tile under an alcove bathtub?

Don’t Tile Under A Drop-In Or Alcove Tub Alcove tubs aren’t meant to sit on top of tiles. They are meant to sit on the bathroom subfloor directly via support feet or mortar.

What sizes do alcove bathtubs come in?

The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep. Small alcove tubs are available for smaller bathrooms, which are anywhere from 48 to 55 inches in length.

Are freestanding bathtubs going out of style?

The freestanding bathtub is a current bathroom remodeling trend that may soon be going out of style. Like vessel sinks, freestanding bathtubs create more areas in your bathroom to clean because of the water and dirt that can get stuck between the floor and the bottom of the tub.

Why are drop-in tubs more expensive?

Built-in tub pro and con: benefits depend on the tub type Drop-In: A drop-in tub can be more cost-efficient because of install and materials, these tubs are often acrylic and not cast iron.

Can you put a freestanding bathtub in an alcove?

We often get asked whether it is suitable to install a freestanding bathtub in an alcove. The answer – absolutely! Freestanding bathtubs have been around for nearly 150 years, and they are still part of every day design. Available in endless shapes, colors and sizes.

Can I put a drop in tub in an alcove?

What do you put around a drop in tub?

Drop in the tub, using sealant at the rim to prevent water from getting inside the deck. The tub will sit on its feet on the floor. The floor should be level. If it isn’t, Khiel says you can use shims.

Posted in Miscellaneous