Is Johnson a good outboard motor?
They are very good engines. They are basically the same as the evinrude oceanPro engines produced through the 90’s. They are carbed 2 strokes that are pretty thirsty for gas and oil. However, if well maintained, they are very reliable.
How do I identify my Johnson motor?
Find the serial number or code number. It will be found on the nameplate located on the outboard itself, on the mounting bracket or on the silver core plug on top of the power head. Remove the cowling by lifting the release levers found on each side or front and rear of the outboard to find the core plug.
How do I find out the year of my outboard motor?
- Locate the serial number on the mounting bracket of the outboard motor, or the silver plug on the top of the motor.
- Write the serial number down.
- Decipher the serial number using “INTRODUCES” as the key code.
- Locate the final three numbers to determine the year.
What is the best 90 horsepower outboard motor?
The all-new Yamaha 90-horsepower In-Line Four V MAX SHO® may be the smallest in the V MAX SHO® line, but it packs the biggest punch of any 90-horse on the water. Its SOHC four-valve-per-cylinder design minimizes weight while optimizing combustion.
Which is better 2-stroke or 4 stroke boat motor?
4-Stroke Outboards Pros The fuel efficiency of a 4-stroke motor can be 50% better than that of a 2-stroke motor with the same HP. As for environmental concerns, 4 stroke outboards produce far less harmful emissions, which can be as much as 90% cleaner than those from a similar sized 2-stroke motor.
Are old 2 stroke outboards reliable?
2 stroke outboards are very good and reliable. These outboards provided a lot of power and torque as they burned a lot of fuel on every cycle. This increased the efficiency of the overall performance on average.
Can you still buy Johnson outboard parts?
To date, the company doesn’t manufacture outboards in the Johnson brand any longer. However, servicing and available parts can still be found and offered by reliable companies.
What kind of motor does a Johnson outboard motor have?
This is a 90 hp Johnson outboard boat motor. This 2-stroke 90 hp Johnson has power tilt and trim and a stainless steel prop. The shaft length on this motor is 20″ which is considered long but standard for outboards over 40hp. This 90 hp Johnson is in very good running condition and is complete…
What is the shaft length on a Johnson 90 hp motor?
The shaft length on this motor is 20″ which is considered long but standard for outboards over 40hp. This 90 hp Johnson is in very good running condition and is complete and ready to install. We have fully boat tested this engine and it runs perfectly. Compression on this engine is around 120psi even. That is very close to factory specs.
What kind of boat will a 90 hp engine run?
The Johnson 90 hp will work great as a bass boat engine ( short shaft model), Open Fisherman, Cruiser, Offshore boat, Bay Boat, Aqua Sport, Well craft, Hydra Sport, Flats Boat, Race boat. Etc. This is the V-4 model which is the same power head as most Johnson/Evinrude, 90 hp, 110 hp, and 115, hp 4 cylinder engines.
Are Johnson boats still in production?
Spending much of its history within the Outboard Marine Corporation, the Johnson name was eventually past to Bombardier which discontinued operations of the brand in 2007. No longer in production.