Does TOTO washlet need to be plugged in?
Because WASHLET® uses electricity for its functions and features, it’ll need to be plugged into an outlet. Power outlet installation might be necessary if there is none near the toilet.
How long does it take to install a TOTO bidet?
about 20 minutes
Luckily, the installation process can be completed by you – no need to Yelp that plumber after all! – in about 20 minutes, with just a few simple tools: a wrench, a flathead screwdriver, and a Phillips-Head screwdriver.
How far away does an outlet need to be from a toilet?
This often requires a electrical outlets within 4 feet of the toilet.
Does bidet outlet need to be GFCI?
Power cords are usually 4 feet long. If you don’t like this set-up, you can power your bidet with an outlet close to the bidet itself. For this, you’ll need to have a professional electrician install an additional three-pronged GFCI outlet of at least 15 amps.
Do you need a plumber to install a bidet?
Bidet Toilet Seats With a bidet toilet seat, you don’t require the needs of a plumber, but that of an electrician. You’ll require an electrician to install an electrical outlet nearby the toilet.
How long is the TOTO Washlet cord?
The power cord is 3 feet (1m) in length. The electrical outlet should be installed on the wall to allow easy installation and removal of the Washlet . 4. Use a water supply of 20 – 80 PSI (0.14Mpa ~ 0.55Mpa).
What is the difference between a washlet and a bidet?
A bidet is a porcelain, stand-alone fixture that you straddle, while a washlet is a seat that fits onto your existing toilet. Bidets typically come in two models. One sprays water from the front toward the back, and the other sprays from the bottom straight up.
Does Toto washlet need hot water?
The TOTO C200 bidet seat only requires a cold water connection. The seat does not require a direct connection to your hot water system. Water is pre-heated in the on-board tank.
Can you wire outlets and lights on the same circuit for a bathroom?
No lighting outlets or other equipment can be fed from the same circuit feeding the bathroom receptacles. For example, a one-family dwelling has two bathrooms and a duplex receptacle has been installed in each. One 20-ampere branch circuit can supply power to both bathroom receptacles but cannot feed anything else.
Does Toto bidet need dedicated circuit?
Do I need a dedicated circuit? In most cases, no. Bidet toilet seats generally work fine on shared bathroom circuits because they sit idle for 23 hours and 55 minutes a day.
Do I need an electrician to install a bidet?
Bidet Toilet Seats With a bidet toilet seat, you don’t require the needs of a plumber, but that of an electrician. You’ll require an electrician to install an electrical outlet nearby the toilet. This can run anywhere from $25-$100, often it isn’t a very complicated job for the electrician.
How much does it cost to install Toto Washlet?
Most people pay between $350 and $500 for their washlet and install it themselves. The price will be higher, however, if you need an electrical outlet installed.