What does Power Commander 3 connect to?
3. Connect to the battery. The power commander has one black 12v connector, which goes onto the black negative battery terminal. Then, for a four-cylinder bike like this Hayabusa, there are four pairs of male and female injector connectors, which ‘tap in’ between the bike’s stock wiring harness and the injectors.
How do I tune my Power Commander 3?
To adjust the buttons on your Power Commander III, follow the instructions below:
- With the ignition off, hold down all three buttons on the Power Commander III unit.
- While still holding down the buttons, turn on the ignition and start the bike.
- Release the buttons.
How do I tune my USB to power commander 3?
With the ignition off, hold down all three buttons on the Power Commander III unit. While still holding down the buttons, turn on the ignition and start the bike. Release the buttons. The light(s) should show up in the last place they were left, by default the center two lights.
Do you need Power Commander with full exhaust?
Your bike will run with or without the pc and be just fine. It wont perform at its best but will still work. I would reinstall and download the map for the slipon your using or full exhaust. The power commander if tuned right should make your bike run better than stock not worst.
How do I add maps to Power Commander 3?
Clicking on the “Open Map File” button will bring up this window. Click the map file you wish to open. The notes for that map file will be displayed in the lower notes area. After a map file is opened, click on the “Send Map” button to send the map to the Power Commander.
How much does it cost for a dyno tune?
Taking your car to a dyno tuning garage is the best way to not only improve performance, boost horsepower, and make the engine run more efficiently. However, initial costs can start at $400 to $700.
Does bigger exhaust consume more fuel?
Unless you perform other engine modifications, simply making the exhaust larger will do nothing at all to either the engine’s performance or fuel consumption. An engine is essentially an air pump. If the air flow out is changed without changing the airflow in, the change will make no difference.
How do you map a Power Commander 3?