How do I fix code P0171 Chevy?

STEP 1: USE FIXD TO ENSURE NO OTHER ENGINE CODES ARE PRESENT.
STEP 2: INSPECT VACUUM LINES.
STEP 3: INSPECT MASS AIR FLOW (MAF) SENSOR.
STEP 4: INSPECT EXHAUST SYSTEM.
STEP 5: CHECK FUEL PRESSURE.
STEP 6: REPLACE AIR-FUEL AND/OR O2 SENSORS.
STEP 7: INSPECT AND REPLACE SPARK PLUGS.

What causes P0171 and P0174 codes Chevy Silverado?

P0171 is triggered by the engine bank 1 “upstream” oxygen sensor and P0174 is triggered by the engine bank 2 “upstream” oxygen sensor. The oxygen sensor alerts your system when the condition is too lean meaning there’s too much oxygen in the exhaust.

Table of Contents

What could cause a P0171 code?

A P0171 code indicates the air-fuel ratio entering your engine block is not ideal. Two main issues typically cause this code. There is either too much air or not enough fuel in the lines to create the right ratio. When there’s too much air, you’ll often find a vacuum leak allowing an excess of oxygen into the line.

Can a dirty throttle body cause P0171?

2. MAF Sensor and Throttle Body Issues. A common source of trouble code P0171 or P0174 is a dirty or failing MAF sensor.

Can an exhaust leak cause engine to run lean?

When an exhaust leak is present, the ECU can detect a false lean signal and respond incorrectly, adding fuel in an attempt to remedy the problem, but further exacerbate it.

Why are trucks tilted?

They elevate the front of the truck while the rear gets lowered or left alone. The front end of the truck is higher than the rear so that when you hit a jump at a high speed the rear hits first. It reduces the chances that your truck will nose dive and crash when hitting hills fast and going airborne.

What happens if leaf spring breaks?

A failure of the leaves or springs will impact the suspension system . Center bolts: You could potentially have leaf springs in great condition but still have a problem with the center bolt. Even something as simple as a loose U-bolt could cause a center pin to crack and harm your suspension system.