What causes fax transmission errors?
This situation can be caused by: Line quality issues, fax device issues, and the sharing of a phone line with other devices such as credit card processing terminals. Temporary conditions such as severe weather conditions in the destination area can also cause transmission failures.
What is communication error on fax?
The ‘Comm Error’ message may appear on the Brother machine’s display if the machine experienced a communication error while sending or receiving a fax. This type of error is generally caused by interference on the telephone line, an incorrect telephone line connection, or an alarm system or other device on the line.
Why is my HP fax machine not receiving faxes?
Check the fax connection Check for phone line connection issues that might cause fax receiving to fail. Confirm the fax cords are in the correct ports: The phone line should be connected to the 1-LINE port and the answering machine, if used, should be connected to the 2-EXT port on the back of the printer.
Why is my fax machine not sending faxes?
If you find your fax not working, it could be due to the following reasons: The fax number you’re trying to send your fax to is busy or unreachable. You are trying to send a fax to a number that is blocked or outside your area code. Your fax machine could not establish a connection with your telephone line or modem.
Why isn’t my fax working?
Why does my fax keep failing?
Faxes can fail for a variety of reasons, such as sending to a non-working or non-fax number, a recipient listing their number on the National Do Not Call List, a recipient line being continually busy or out of paper, or if there is noise or interference on the line.
How do I test a fax line?
To test a fax line, make sure your fax machine is plugged into the line. Send someone a fax and ask the recipient to report whether the fax arrives and looks normal. Then, have someone send you a test fax and confirm the fax arrives and prints as it should.
How do I fix comms error?
First, ensure all terminal phone cable connections and phone supply outlets are connected correctly. Power off the terminal before connecting the telephone cable; unplug the power cord from the 110-Volt, or regional, grounded power receptacle.
Why is there a communication error with my printer?
Your computer may not be properly connected to the printer. Perform the setup procedure described in the Setup sheet. The interface cable may not be plugged in securely. Check both ends of the interface cable between the printer and the computer.
How can I check if my fax machine is working?
To test a fax machine simply fax to somebody else with a fax machine – and have them send a reply fax back to you. When sending the fax, turn on the confirmation page feature – a successful confirmation page shows that the fax machine on the other end has successfully received the message.
What is a comms error?
If your EFTPOS terminal or receipt shows a Comms Error when you try a transaction, settlement, or logon it means that the terminal is unable to connect to the payment network. Depending on what communications method your terminal uses there are different ways to find the cause for this and resolve it.
How do I fix the communication error on my HP printer?
Reconnect the parallel or USB cable and try printing again. If printing is successful the cause of the issue may be a loose parallel or USB cable. Disconnect the power cord from the rear of the printer or All-in-One product, wait for a few seconds, and reconnect it. Restart your computer and try printing again.