Menu Close

How much does it cost to have something waterjet cut?

How much does it cost to have something waterjet cut?

Typically, waterjet cutting cost per hourly rate lies somewhere between $12 to $30 per hour. Of course, in specific requirements, this number can go higher or lower.

Can you cut tile with a waterjet?

Waterjet can cut almost any type of tile, and you do not need to change the tooling in this cutting process. It can pierce its own starter hole to ensure precise cuts. With abrasive waterjet cutting, you do not need to deal with heat. Your tile will retain its original shape and strength when you cut it with waterjets.

Can a waterjet cut ceramic?

Ceramics vary widely in terms of their suitability for waterjet cutting. Some will cut and pierce very easily and quickly. Some will not pierce easily and may crack. Others may cut extremely slowly.

What is water jet tile?

What are waterjet cut tiles? These are tiles are cut using a concentrated, highly pressurized stream of water mixed with mineral cutting abrasives. This cutting method allows for more elaborate patterns and curves to the tiles.

What is water jet mosaic tile?

Waterjet Mosaics These versatile floor or wall tiles give the option of curved or softer lines, and often mix materials such as glass, metal and natural stone as well as rare materials such as mother-of-pearl, moonstone and more.

Is a water jet better than a plasma cutter?

As material thickness increases, the cut will be less clean as the plasma struggles to melt through all of the material without producing unwanted slag. The water jet is generally considered the more accurate machine and will produce higher quality cuts across a wider range of materials and thicknesses.

How much water does a water jet cutter use?

Waterjets use between one half and five gallons (2 to 19 liters) of water per minute when cutting. Some of that water is used to cut and some of it is used to cool the pump.

What is a waterjet mosaic tile?

What is water jet marble?

Is marble mosaic good for shower floor?

So, whether you’re aiming for contemporary décor or recreating a classic effect, textured marble tile is a great choice for creating an anti-slip shower floor and featuring classic white marble in a new and exciting way! No need for a shower mat to make your marble floors non-slip!

What pressure is a water jet cutter?

Cutting with a water jet is a method of engineering for cutting objects using the energy from high speed, high density, ultra-high pressure water. The water is pressurized to a maximum 392 MPa (approximately 4,000 atmospheres) and projected from a small-bore nozzle (Φ0. 1 mm).

How thick will a water jet cut?

10-12 inches
Cutting Thickness for Hard Materials For hard materials, the maximum cutting thickness of waterjet cutters is taken to be between 25-30 cm (10-12 inches). It is possible to cut an even more thick material, but it can make the process slower than required.

What can water jets cut?

Waterjet machines cut all types of metals: hardened tool steel, aluminum, titanium, and a host of exotic metals that prove difficult to cut with other tools or processes. Cutting with a waterjet produces a smooth edge with no burn marks, cracking or excess burrs.

Posted in Blog