What does DBX DriveRack PA2 do?
The DriveRack® PA2 provides all the processing you need between your mixer and amplifiers to optimize and protect your loudspeakers.
How do I update firmware on DriveRack PA2?
Launch the PA2/VENU360 Control app, click Search for devices, and select your DriveRack. Select the Settings (gear) icon and click Check for Firmware Update. Once complete, the DriveRack will restart. Click Search for devices to select the DriveRack and confirm the firmware has been updated.
How do I factory reset my dbx Driverack pa2?
Factory Reset (Hard Reset) – Hold STORE button during power up until the display will shows ‘FACTORY RESET’. Then release the Store button. Now Press the WIZARD button to do the factory reset. Pressing the STORE button will abort the factory reset.
How do I factory reset my dbx Driverack PA2?
How do I factory reset my dbx DriveRack pa2?
How do I factory reset my pa2?
How do you reset the parental password on a PS2?
Hit Down on the controller until you select Parental Control Settings. Press the Right direction button to select it. Enter your password. Since you’ve reset the password in the previous section, enter your newly created password now.
How do I change parental settings on PS2?
In order to access Parental Control Settings on a PS2, parents can enter the DVD Setup Menu, click “Custom Setup”, and select “Parental Control”.
What is the DriveRack PA2?
a stylish new design, the DriveRack PA2 was engineered to continue the DriveRack legacy of great-sounding and affordable loudspeaker management processing. Thanks for choosing dbx. 3 Features • 24-Bit A/D & D/A Converters • 48 kHz/32-Bit Floating Point Processing • dbx Type IV™ Conversion • Setup Wizard For Easy System Configuration
How do I reset the DriveRack PA2 to factory settings?
1� Power down the DriveRack PA2. 2� Press and hold the STOREbutton then apply power to the DriveRack PA2. Keep the button pressed until the “FACTORY RESET Release STORE button” message appears in the LCD display then release the STOREbutton.
How do I connect the PA2 to my network switch/router?
Use straight-through CAT5, CAT5e, or CAT6 Ethernet cables to connect the PA2 to your network switch/router. The below diagrams show the pinout of such cables.
What is home mode on the DriveRack PA2?
It is the mode the DriveRack PA2 enters when it initially boots and is the mode which displays the selected home screen. From any menu, you can get back to Home mode by repeatedly pressing the BACKbutton. How many times you must press the BACKbutton to return to Home mode is determined by how deeply you have navigated in the current menu.