What is a D001 waste?
Wastes identified by the Environmental Protection agency (EPA) as Ignitable hazardous wastes are assigned a D001 waste code and must be managed as hazardous waste on site, according to your RCRA generator status.
What is a D002 hazardous waste?
Aqueous wastes with a pH greater than or equal to 12.5, or less than or equal to 2 are corrosive under EPA’s rules. A waste may also be corrosive if it has the ability to corrode steel in a specific EPA-approved test protocol. Corrosive wastes carry the waste code D002.
What are listed wastes?
Listed wastes are wastes from common manufacturing and industrial processes, specific industries and can be generated from discarded commercial products. Characteristic wastes are wastes that exhibit any one or more of the following characteristic properties: ignitability, corrosivity, reactivity or toxicity.
What are the four listed hazardous wastes?
EPA’s regulations in the Code of Federal Regulations define four hazardous waste characteristic properties: ignitability, corrosivity, reactivity, or toxicity (see 40 CFR 261.21-261.24). This document presents the regulations developed that list wastes as hazardous in §§ 261.31 through 261.33.
What hazard class aligns with a D001 waste code?
[§261.21(a)(4)(i)(A)] If the waste you are shipping down the road is a DOT hazard class 5.1 oxidizer or 5.2 organic peroxide, then it is a D001 oxidizer.
What is corrosive waste?
Corrosive wastes are materials, including solids in California, that are strong acids or bases, or that produce acidic or alkaline solutions. Aqueous wastes are corrosive when they have a pH less than or equal to 2.0, or greater than, or equal to 12.5.
Can a solid be D001?
(b) A solid waste that exhibits the characteristic of ignitability has the EPA Hazardous Waste Number of D001.
How many wastes are listed on the 3 EPA source list?
39 wastes
Healthcare facilities may also deal with some F-list wastes, such as acetone, methanol, toluene, xylene, and methylene chloride. The full record of all 39 wastes on the F-list can be found on the EPA’s website here: 40 CFR §261.31.
What are examples of corrosive waste?
Corrosivity – Aqueous wastes that have a pH less than or equal to 2.0, or greater than or equal to 12.5, are considered corrosive hazardous wastes….Examples are:
- Petroleum parts washer solvents;
- Solvent-based paint waste;
- Waste kerosene or gasoline; and.
- Spent paint booth exhaust filters.
What are listed hazardous wastes?
RCRA Hazardous Waste Lists
- Wood preserving wastes.
- Spent solvent wastes.
- Dioxin bearing wastes.
- Electroplating or metal finishing wastes.
- Production of chlorinated aliphatic hydrocarbons.
- Petroleum refinery wastewater treatment.
- Multisource leachate.
- Dioxin bearing wastes.