What is the standard height of an electrical outlet in a bathroom?
A typical bathroom counter is 32 to 36 inches above the floor. A bathroom counter usually has a 4-inch backsplash, where the counter surface turns up the wall. Backsplashes prevent water from running behind a countertop. An electrical outlet receptacle is usually placed 2 to 3 inches above the top of the backsplash.
Where should bathroom plugs be placed?
You should keep the receptacle at least 6 feet away from the edge of a bathtub or shower and at least 1 foot away from sinks. Avoid positioning a receptacle over the center of the sink, where cords hairdryers and electric shavers might hang down into the basin.
What is code for bathroom outlets?
The NEC requires that all outlet receptacles in a bathroom be GFCI protected. Outlet circuit must be 20 amps: The outlets in a bathroom should be served by a 20-amp circuit, separate from the lighting circuit, to provide power items such as curling irons, razors, and hairdryers.
What is the code for outlet height?
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the …
Where is bathroom GFCI located?
Modern GFCIs say on their packages that you may wire as many as six outlets through the GFCI. Electricians will frequently wire outlets in locations that require GFCI circuitry through one single GFCI that they will place in a bathroom, powder room, garage or near the panel box.
Do bathrooms need GFCI outlets?
GFCI protection is required for 125-volt to 250-volt receptacles supplied by single-phase branch circuits rated 150 volts or less to the ground. GFCI receptacles are required in bathrooms, garages, crawl spaces, basements, laundry rooms and areas where a water source is present.
Does an outlet near a toilet need to be GFCI?
The National Electric Code states that, at a minimum, a bathroom needs one GFCI-protected outlet. It’s recommended that each bathroom has two or three GFCI protected outlets. The number of outlets you choose to protect is up to you, as long as you have at least one GFCI protected outlet in a bathroom.
How high does a GFCI need to be off the ground?
The required GFCI protection can be provided by GFCI receptacles or GFCI circuit breakers. Homes must have at least one outdoor receptacle at the front and rear of the house. They must be readily accessible from the ground and positioned no more than 6 1/2 feet above grade (ground level).
Does a bathroom fan need to be on its own circuit?
Bathroom Circuits If the vent fan has a built-in heater, it must have its own 20-amp circuit. This is called a “dedicated” circuit because it serves only one appliance or fixture. Heat lamps, wall heaters, and other built-in heating appliances may also require dedicated circuits.
What is code for distance between outlets?
The US National Electrical Code, Section 210.52, states that there should be an electrical outlet in every kitchen, bedroom, living room, family room, and any other room that has dedicated living space. They must be positioned at least every twelve feet measured along the floor line.
What does a blue outlet mean?
loss of ground protection
The blue color outlets are self grounding outlets with alarm indication in case of loss of ground protection are used in the following applications. Hospital grade outlets in emergency rooms in healthcare buildings and hospital, industrial and commercial applications.
How close can I put an outlet to a toilet?
Electrical outlet recommendations for electrical bidet toilet seats. Many of the modern bidets on the market today use electricity to offer luxury features. This often requires a electrical outlets within 4 feet of the toilet.
Can I put an outlet behind a toilet?
Since the electrical cords on bidet seats are about 4 feet long, it’s recommended that new outlets be installed on the wall behind the toilet. Most of the electrical cords extend out from the right hand side of the bidet when facing the toilet, so plan accordingly.
How close can you put an outlet to a toilet?
How close can a power point be to a toilet?
Power-points must be a minimum of 150mm from the edge of the water container (i.e bathroom sink). However, Bluegum recommends you allow at least 300mm, just to be safe.