Menu Close

Why is my AM radio not working?

Why is my AM radio not working?

The first thing you should do when your radio stops working is check its fuses and replace any that have blown. Also, if you have an after-market stereo head unit that is meant to be easily removed, be sure to check the back of the unit itself for any fuses.

How do you turn on an Audi concert?

Audi Concert Radio

  1. Radio is on and appears in “SAFE” mode.
  2. Simultaneously press the FM 2 and RDS buttons, holding them down, until “1000” lights up.
  3. Use the station buttons 1 through 4 to input the radio code.

Why can’t I get AM radio reception in my car?

Check Your Antenna Connections One of the most common causes of poor car radio reception is a poor antenna connection. If the antenna cable is poorly seated in your head unit, or any of the connections are loose, worn, or corroded, you’ll often find it difficult to tune into your favorite station.

How do I reset my radio in my Audi A6?

For A4/A5/A6/Q5/Q7, press SETUP, BIG KNOB and top right soft button together. For A8, apparently, press TEL, BIG KNOB and the top right soft button together.

How do I change my car radio from AM to FM?

Follow these steps to tune to a radio station on your car stereo.

  1. Press the SOURCE, HOME, or MODE button on the main unit of the car stereo, and then select radio or Tuner.
  2. Select band (AM or FM).
  3. To tune automatically, touch the SEEK- or SEEK+ button on the Main unit or Screen display.

Why is DAB radio not working?

The problem could be due to a number of reasons, the station may have stopped broadcasting or have moved multiplexes rather than a radio fault. All of the stations in one multiplex should be behaving the same way. If you are still having problems, it is possible an unwanted signal is the cause.

How can I improve my AM reception?

Q: How do I get better AM reception? You can get better AM reception by using an external antenna such as a loop antenna, placing your radio near the window with its rear facing outside, or switching off/moving away any electrical appliances that have been proven to interfere with your radio’s reception.

How do you reset an Audi radio in safe mode?

Press the FM2 and RDS buttons simultaneously and hold until “1000” shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider “1000” to be the code.

How do I switch from FM to AM?

Press TUNER to switch the input source to “Tuner”. Press OPTION. The option menu screen is displayed. to select “FM/AM”, then press ENTER….TV screen.

FM: When listening to an FM broadcast.
AM: When listening to an AM broadcast.
Posted in Blog