Menu Close

What is sb50 connector?

What is sb50 connector?

SB® 50 connectors feature a one piece plastic housing using stainless steel springs to hold low resistance contacts in place. Wires sizes from 16 to 6 AWG (1.5 to 13.3 mm²) are held in the smallest of the SB® series housings. • Low Resistance Silver or Tin Plated Copper Contacts. Allows UL rated currents up to 120 amps.

What are the different sizes of Anderson plugs?

Here at Truck Electrics we supply 3 sizes of Anderson Connector: 50 Amp Andersons, 175 Amp Andersons & 350 Amp Andersons….Anderson Connectors & Cable Sizes:

  • 50A Anderson Connector – 16mm² Battery Cable.
  • 175A Anderson Connector – 35mm² Battery Cable.
  • 350A Anderson Connector – 50mm² Battery Cable.

Are all Anderson connectors the same?

Anderson plugs come in a range of sizes and colours, the most common being the grey and the red 50-amp ones. You can get up to a 350-amp. The bigger the current, the bigger the Anderson plug we need. A red Anderson plug will only fit into a red Anderson plug.

Are all Anderson connectors the same size?

ANDERSON PLUG DIMENSIONS In terms of plug sizing: the higher the current rating, the larger the plug. In the multi-pole SB® series the plugs range in size from the tiny SBS® Mini (rated at 45 amps) all the way to the SB®350 (350 amps).

What’s the difference between a red and grey Anderson plug?

By using red Anderson plugs you are protecting your system from being hooked up incorrectly. Likewise, if you are using a panel with a regulator already fitted then you would have a grey Anderson plug (after the regulator) as it is safe for direct connection to a battery.

What are blue Anderson plugs used for?

A Blue Anderson plug is most commonly used when a BatteryPLus35 Battery Management System with a built-in solar regulator has been installed. If you have a Blue Anderson Plug, this is connected directly to the input of your solar regulator.

What is the difference between a red and grey Anderson plug?

Should you solder or crimp Anderson plugs?

Soldering. One of the many questions we receive is, “is it best to solder or crimp Anderson Powerpole Connectors?” While both methods will work, crimping an Anderson Powerpole connector to wire is much preferred for better long lasting results. It’s important that each method be performed properly.

What is the difference between red and grey Anderson plug?

How do you crimp Anderson connectors without a crimper?

From here it’s pretty straightforward:

  1. Clamp up the connector in a vice (as it’ll get very hot) with the cut facing up.
  2. Insert your chosen cable into the connector.
  3. With a nice hot soldering iron, start letting molten solder flow into the connector.

Can you crimp Anderson plugs?

You can crimp or solder Anderson plugs, however, this is not as reliable in high-vibration environments such as a ute bed or trailer.

What is a blue Anderson plug used for?

Can I plug a solar panel into my caravan Anderson plug?

You can use the Anderson plug on your camper trailer’s a-frame to introduce portable solar panels into the power mix depending on your system, but be sure to fit a regulator between the battery bank and the panels to avoid damaging the battery through overcharging.

What is the red Anderson plug used for?

The red Anderson plug is often used for un-regulated solar feeds or for an ALKO ESC line. Please note red Anderson plugs will only plug into another red Anderson plug. They are not compatible with any other colour.

What is a blue Anderson plug for?

The Baintech Blue 50A Anderson Plug 2 Pack is designed to lock securely together and provide a solid connection between two cables. Rated for 50A, the Baintech Anderson Plug is great for connecting your trailer, boat or any other connection up to 50A.

Why use red Anderson plugs?

How do you crimp an Anderson plug without tools?

Posted in Cool Ideas