Menu Close

How do you clear a Dell SEL?

How do you clear a Dell SEL?

2. Viewing System Event Log using System Setup

  1. Press F2 during POST to enter System Setup.
  2. Selected iDRAC Settings.
  3. Go to System Event Log.
  4. To clear the records, select Yes. Else, select No.
  5. To view the system events, click Display System Event Log.
  6. Click Back, click Finish, and then click Yes.

How do I check Dell server logs?

Follow these steps to export the Lifecycle Controller log:

  1. Enter the iDRAC web interface.
  2. Go to Overview > Server > Logs.
  3. Click on the Lifecycle Log tab.
  4. In the Lifecycle Log page, click Export.
  5. Select any of the following options: Network — Export the Lifecycle Controller logs to a shared location on the network.

What is SEL log?

The system event log (SEL) resides on the CIMC in NVRAM. It records most server-related events, such as over and under voltage, temperature events, fan events, and events from BIOS. The SEL is mainly used for troubleshooting purposes.

How do I format a Dell PowerEdge server?

1. Restore the BIOS defaults settings on a Dell PowerEdge Server.

  1. Power on the system.
  2. While the blue Dell logo is visible, press the < F2 > key to enter the System Setup.
  3. Enter the “System BIOS” section.
  4. Click on the button “Default” in the low-end corner.
  5. A popup will ask the confirmation of action, press “Yes”.

How do I clear SEL logs in Dell iDRAC?

What is SEL in server?

How do I factory reset my Dell server?

How do I reset my server to factory settings?

Procedure

  1. On the ASMI Welcome pane, specify your user ID and password, and click Log In.
  2. In the navigation area, expand System Service Aids.
  3. Select Factory Configuration.
  4. Select the options that you want to restore to factory settings.
  5. Click Continue. The service processor reboots after all settings have been reset.

How do I reset my Dell iDRAC server?

To reset the iDRAC to factory default values using the iDRAC Settings Utility.

  1. Reboot the system and press F2.
  2. In the System Setup page, click iDRAC Settings.
  3. Click Reset iDRAC configurations to default all.
  4. Click Yes to confirm, and then click Back.
  5. Click Finish.

How do I get TSR logs from Dell server?

Generate a SupportAssist collection

  1. Log in to the iDRAC GUI. (
  2. Expand Overview → Server → Troubleshooting → SupportAssist. (
  3. Click Edit Collection Data.
  4. Select the data to include in the collection.
  5. Click Apply (Fig.2)
  6. Click Export Support Collection(Fig.1)
  7. The progress is displayed. (

How do I get Dell CMC logs?

It is recommended to use PuTTY to connect to the controller and gather logs.

  1. Download PuTTy.
  2. Open PuTTY and enable logging (Figure 1)
  3. Under Session, specify the CMC hostname or CMC IP address and click open (Figure 1)
  4. Type the Command that you want to run.
  5. To end the session type the command: exit.

How do I restart iDRAC?

Tutorial – Restart iDRAC Interface

  1. Open a browser software, enter the IP address of your iDRAC interface and access the administrative web interface.
  2. After a successful login, the administrative menu will be displayed.
  3. On the Diagnostics screen, click on the Reset button to restart your iDRAC interface.

What is SEL in hardware?

The hardware SEL is a function of most server motherboards. The baseboard management controller (BMC) records hardware events, including most health events, into an area of the motherboard non-volatile memory. In other words, this event log can be retrieved even after the system has been cold booted.

What is a SEL log?

How do I disable Dell server?

Power Down Server Gracefully Using the Power Button

  1. Press and quickly release the Power button on the front panel. This action causes ACPI-enabled operating systems to perform an orderly shutdown of the operating system.
  2. Disconnect the power cords and data cables from the server. See Disconnect Cables From the Server.

How do you completely reset your computer?

For Windows 10, go to the Start Menu and click on Settings. Then navigate to Update & Security, and find the Recovery menu. Next, select Reset this PC and choose Get Started. Follow the instructions to revert your computer back to when it was first unboxed.

Posted in Miscellaneous