How do you put a BlueAnt pump in pairing mode?
Place the Pump Air 2 into the charging case to turn it off. Take the Pump Air 2 out of the charging case and it will power on and the right ear bud will say “pair me”. On your phone, go to settings > Bluetooth® > enable Bluetooth® > scan/search/add new devices > select BlueAnt Pump Air 2.
How do I reset my BlueAnt pump?
Reset the BlueAnt device. Press and release the “Vol +,” “Vol -” and “Multi-Function” buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.
Can wireless headphones be used with a laptop?
If your computer is equipped with Bluetooth (and these days, most are), then you can connect Bluetooth headphones to your PC in the same way you use them with your smartphone. You can connect your headphones to the PC using the Devices section of the Settings app on your PC.
Why doesn’t my computer recognize my Bluetooth headphones?
Check your Bluetooth device Make sure your Bluetooth device is turned on, is charged or has fresh batteries, and is in range of your PC. Then, try the following: Turn off your Bluetooth device, wait a few seconds, then turn it back on. Make sure your Bluetooth device is in range.
How do you make a blue ant discoverable?
Turn the X2 on by pressing the power button on the back, the X2 will announce “Bluetooth” and the light on the back will flash to signal the X2 is in pairing mode. On your phone or source device search for and select the BlueAnt X2.
How do I turn off BlueAnt?
Short press button to power on/off the speaker. The indicator light will flash blue. The speaker has a memory function mode as prior to power off. Each time the speaker powers on it will reset to 50% volume.
Who owns Blue Ant Media?
Michael I.M. MacMillan
Blue Ant Media Inc. is 100% held by Michael I.M. MacMillan.
How do I get my Bluetooth headphones to work on Windows 10?
To pair a Bluetooth headset, speaker, or other audio device On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Choose the device and follow additional instructions if they appear, then select Done.
Why can’t I add a Bluetooth device to Windows 10?
If you can’t add a Bluetooth device to Windows 10, most of the time it’s a problem with the driver. If the Bluetooth is not working, update the driver by using Device Manager. If the device is not showing in Device Manager, look for the correct driver from the manufacturer of the device.