Who makes OMC Cobra?
Outboard Marine Corporation
Outboard Marine Corporation (OMC) was a maker of Evinrude, Johnson and Gale Outboard Motors, and many different brands of boats. It was a multibillion-dollar Fortune 500 corporation….Outboard Marine Corporation.
| Industry | Marine Outboard Motors and Boats |
|---|---|
| Fate | Bankruptcy |
| Headquarters | Waukegan, Illinois , United States |
How do you fill a OMC Cobra outdrive?
- Step 1: Place the drive in a vertical position. Place the drive in a vertical position.
- Step 2: Remove the fill plug.
- Step 3: Fill the drive with OMC Hi-Vis gearcase lubricant.
- Step 4: Frequently check gauge while filling.
- Step 5: After drive has been run, recheck oil level.
How do you remove an OMC Stringer outdrive?
Removal of OMC Stringer Complete Outdrive
- Tilt the vertical drive enough to expose the shift cable retainer on the intermediate, then remove the retainer screw and lockwasher.
- Tilt the vertical drive down to the position shown in Figure 7-2, just before the locating pins enter their seats.
Who makes Cobra outdrive?
Introduced for the 1986 model year was the Cobra. OMC built an all-new, modern sterndrive factory in Lexington, Tennessee and started producing a traditional style sterndrive. Drawing heavily on the Mercruiser and Volvo sterndrive designs, the new Cobra had a transom mounted drive utilizing U-joints and trim rams.
How do you tell which OMC outdrive you have?
The model and serial numbers of the vertical drive should be located on the engine model and serial number plate. If the vertical drive model and serial numbers are not recorded with the engine model and serial number, they can be found on a plate located on the vertical drive.
What kind of oil goes in a OMC outdrive?
OMC Cobra’s must use straight 30W oils. You cannot use multi-viscosity oil. The additives that are put in multi-viscosity oils cause the oil to break down too fast. This will cause the oil to lose its lubricity characteristics.
What is a OMC Cobra engine?
The Cobra is the sterndrive product manufactured by Outboard Marine Corporation (OMC). It came about when previous patents for the Volvo engine parts that were used expired, and a redesign was mandated. There have been several versions of the drive, offering various capacities and correcting for previous issues.
What is an OMC motor?
Refers to your outboard’s model/ serial number. OMC itself stands for the Outboard Marine Corporation, which was previously the world’s largest manufacturer of outboard motors – overseeing brands such as Evinrude and Johnson.
Who bought out Johnson boat motors?
Bombardier Recreational Products
It has been owned since 2001 by the Canadian firm Bombardier Recreational Products. Bombardier stopped selling outboards under the Johnson brand after 2007, and moved all sales entirely to Evinrude Outboard Motors until they were discontinued in June 2020.
What is the difference between OMC and Mercruiser?
Mercruiser probably has a better parts network and track record as was stated above. Older OMC’s had a big bellows on the transom that the outdrive went through. They were prone to a lot of problems. Mercruiser probably has a better parts network and track record as was stated above.
What year is a Johnson outboard serial number?
The year is encrypted in the serial number or model number on almost any Johnson outboard. From 1980 to present the year is coded in the serial number. If the Johnson or Johnson Evinrude is older then 1980, you can find the year of the outboard using one of several methods.