Menu Close

What is a 565 motor?

What is a 565 motor?

The 565 Is The First Big Block Engine In Our Pro Series Line. If You’re Looking For Big Horsepower, Then Get Ready To Hold On! This “Bad Boy” Pushes The Dyno Past The 1000HP Mark. It’s Relatively Short Stroke And Conventional Chevy Headed Design Makes This Engine The Durablility King. Horsepower.

What is the largest cubic inch V8 engine?

The Chevrolet Performance division has revealed the biggest and most-powerful naturally aspirated V8 engine it has ever built, even as General Motors accelerates its transition toward electric power. The 632-cubic-inch ZZ632/1000 crate engine was designed for drag racing builds and not meant to be used on the street.

What is the largest cubic inch engine?

At 1,005.8 ci, the “Godfather” is the biggest big-block engine ever built.

How much horsepower does a 572 big block have?

The 572 offered from GMPP is designed as a 4.560-inch bore by 4.375-inch stroke combination using rectangle-port aluminum heads on a tall-deck Gen VI block….This 572-Inch Crate Engine Look-Alike Rocks Out On Stage To The Tune Of 845 hp On Pump Gas.

BY THE NUMBERS
572ci Big-Block Chevy
Bore: 4.562 inches

How much does a 632 big block cost?

$29,499 USD
A naturally aspirated V8 engine with a displacement of 632 cubic-inches (10.4 L). It produces 1,004 hp and 876 lb-ft of torque on 93 octane fuel and a redline of 7,000 rpms. The cost? $29,499 USD.

How much power can a 572 make?

The 572 offered from GMPP is designed as a 4.560-inch bore by 4.375-inch stroke combination using rectangle-port aluminum heads on a tall-deck Gen VI block….This 572-Inch Crate Engine Look-Alike Rocks Out On Stage To The Tune Of 845 hp On Pump Gas.

BY THE NUMBERS
572ci Big-Block Chevy
Valve lift: .842/.813 inch

How much horsepower does a 572 put out?

In keeping with the reliability mandate, this engine was configured to run with only 7 psi of boost, and when tested on the IMM’s DTS dyno, and running on 91-octane pump gas, the New Old School 572 cranked out 951 horsepower at 6,400 rpm and 878 lb-ft of torque at 5,000rpm.

Posted in Mixed