How many volts is an airsoft battery?
How much voltage can you get from Airsoft batteries. In the market, the most common you can get are 7.2V, 8.4V, 9.6V and 10.8V. If this is not enough you can also buy 12V, but it’s not common to have on regular airsoft gun.
How long does it take to charge a 1200 mah 8.4 V airsoft battery?
For example, you have a 1200mAh mini pack with 250mA rated charger, so….. If you have a 150mA charger, this will take 12hours. If you have a 500mA rated charger, your battery will be charged in 3.6 hours.
Can you overcharge a airsoft battery?
Overcharging it can cause battery cells to split, leak, and even cause a fire so they should never be left alone even with a smart charger.
What battery do I need for my airsoft gun?
In airsoft there are two different popular types of batteries. We have the nickel metal hydride battery, also known as the NIMH battery, and we have Lithium batteries. NIMH are not as costly, and don’t have as many safety issues as Lithium batteries.
How long does it take to charge a 8.4 V NiMH battery?
Delivers full charge within 1 – 2 hours. Charging Current 0.9A for battery packs with capacity from 900mAh -1800mAh. Charging Current 1.8A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is 1.5 hours.
When should I stop charging NiMH?
Check cell temperature : If an NiMH cell becomes hot then the charging should be terminated. Consumer chargers do not always terminate the charge correctly. Remove the batteries when warm to the touch. Stop using a charger that “cooks” batteries.
How long does it take to charge a 9.6 volt battery?
Generally, the 9.6v battery charger is equipped with delivering a maximum of 2000 mA. And thus it will take anywhere between 2-2.5 hours to fully recharge a 9.6 volts battery. It is always advisable to recharge your batteries to maximum using the 9.6v battery charger before first-time use.
How long does it take to charge a 9.6 volt airsoft battery?
So it will take 5 hours total to charge a completely dead/new battery to its full capacity. You simply divide the mA on the charge to the mA of your battery and you will get the time it should take to fully charge a completely drained battery.
What is the voltage of a fully charged NiMH battery?
1.3 to 1.2 volts
As a fully charged battery is discharged the voltage begins at about 1.5 volts followed by a sharp drop to around 1.3 volts. The voltage remains between 1.3 to 1.2 volts for about 75% of the profile until a second sudden drop in voltage occurs as the useful capacity of the battery begins to deplete.
What voltage should a fully charged NiMH battery be?
Usually, a fully charged battery would display a voltmeter reading of around 1.5 volts. That means your battery is in good shape if your voltmeter shows a voltage anywhere between 1.3-1.5 volts.
Can I use a 12v charger on a 9.6 V battery?
Therefore, for your 9.6 volt, 500 mAh battery, the charger should have a voltage output of no less than 12 volts (that’s open circuit voltage actually measured and not what’s written on the charger) and should have a current rating of no more than 0.5 amps (500 mAh) for a 1C charge rate.
What voltage should I charge my 9.6 V battery?
The output voltage from the 9.6v battery charger is 12 volts with 400 mA. The battery types that can be charged using the 9.6v battery charger are the rechargeable nickel-metal hydride type and the rechargeable nickel-cadmium batteries. The compatible battery voltage should not be more than 9.6v.
What is the best charge rate for NiMH batteries?
NiMH trickle charging While NiCd batteries may be trickle charged at a rate of around 0.1C, this is considered too high for NiMH batteries and it is generally accepted that for most NiMH batteries trickle charging should be accomplished at a rate of about 0.05C.