How do I fix PXE-E61 media test failure?

How to fix PXE-E61 Media Test Failure, Check Cable Error?

Table of Contents

Check the Power Supply and Cables.
Remove external USB storage devices.
Change the boot order in BIOS.
Disconnect the network drive or Reset BIOS.
Get the help of Data Recovery Experts.

What does PXE-E61 media test failure mean?

The PXE-E61 and PXE-M0F errors can happen in the following circumstances: The Intel NUC is configured to boot to a network, but a network cable isn’t connected to the Intel NUC. The Intel NUC can’t find the Windows installation on the hard drive (The drive is not detected).

How do I disable PXE boot?

Disabling PXE boot

Enter “Setup” once the computer is turned on.
Click on the Advanced tab and locate the “Integrated Devices” option.
Find the “Network Interface Controller” option.
Set it to “On” instead of “On with PXE” to disable PXE.
This disables PXE.
In some systems, there isn’t a PXE option.

How do I disable Intel boot agent in BIOS?

You don’t have to do both options. To prevent the Intel Boot Agent (IBA) from executing: Go into the BIOS and find the order settings for the boot devices. Move the boot agent down the list after the hard drive or the device you prefer to boot from.

How do I disable PXE on Lenovo?

Power on the system and Press F1 to enter UEFI setup menu. Enter Network page and disable the PXE mode from Network Boot Configuration. Restart the system.

How do I fix start PXE over IPv4 Lenovo Windows 10?

Here are a few ways to fix the start PXE over IPv4 error in Windows 11/10:

Method #1- Disable Legacy Support and Secure Boot.
Method #2- In BIOS, Disable Wake on LAN.
Method #3- Upgrade BIOS.

How do I disable Intel PXE boot?

How do I disable PXE BIOS Lenovo?

How do I fix Lenovo boot menu?

9 Ways to Fix a Lenovo laptop stuck on the boot menu

Solution 1: Automatic Repair.
Solution 2: Fix the boot sector or BCD.
Solution 3: Reset your Lenovo PC to factory settings.
Solution 4: Reinstall Windows.
Solution 5: Boot your laptop without data loss.
Solution 6: Restart in Safe Mode.

How do I bypass PXE boot?

How do you get out of a PXE boot?

What does start PXE over IPv4 mean Lenovo?

PXE booting is when your system starts over the IPv4-based network. This way of booting for your PC is a method of last resort. It also indicates that other devices for booting were not available such as the hard disk.

How do I disable PXE boot on Lenovo?

How do I force my Lenovo laptop to boot?

Press the Power button at the Windows login screen or in the Settings charm. Then, press and hold the Shift key on the keyboard and click Restart. After the PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart. After the PC restarts, there is a list of options.

Why is my Lenovo laptop not booting?

Try turning the laptop off by holding the power button down until the laptop shuts off. Wait a few seconds and then turn the laptop on, press Enter and then F12 when you see the Lenovo splash screen. This should give you the options to try a different boot source.

How do I turn off PXE in BIOS?