How do I print an Epson TM-T88V configuration page?
Printer connected to a router (wired or wireless).
- Connect the TM-T88V-i printer to the network, and turn it on.
- Push and hold the reset button at the rear of the printer for 3 to 4 seconds (use a pen tip).
- The printer will print it’s configuration. (
Does the Epson TM-T88V have Bluetooth?
Epson TM-T88V (953): Bluetooth + Built-in USB, PS, EDG, EU | POS printer (TM) | POS Printers | Retail | Products | Epson Europe.
How do I print a configuration page on my Epson printer?
Press the down arrow button, select Network Settings, and press the OK button. Press the down arrow button, select Network Status, and press the OK button. Press the down arrow button, select Print Status Sheet, and press the OK button.
Where is the IP address on an Epson TM t88v printer?
Epson Receipt Printers (TM-T70, TM-T88, TM-M30 ethernet, TM-T20)
- Power the printer off.
- Press and hold the feed button.
- Power the printer on and continue to hold the feed button.
- After a few seconds a settings sheet will print, including the IP address of the printer:
How do I connect my Epson TM t88v to my iPad?
Connects directly to your network with a LAN cable. Your computer or iPad then connects to your printer through your network….3. Connect your printer to Hub
- On your computer, open Lightspeed Hub.
- Under Receipt printer, select Connect.
- Select USB.
- Select Search for printer.
How do I print a test page on an Epson printer without a computer?
Perform a self-test on the Epson printer
- Power the printer off.
- Press the FEED button while simultaneously turning on the printer.
- The printer should print out the firmware version and communication settings.
- Press the FEED button again – the printer should print a sequence of letters, numbers, and symbols.
How do I access Epson Web config?
Locate the IP Address for your product that is listed on the network status sheet. On a computer or other device connected to the same network as your product, open a web browser. Enter your product’s IP address into the address bar. You see the available Web Config utility options.
What is IP address for Epson printer?
Press to go back. Then do one of the following: If you selected AUTO as the IP ADDRESS SETTING, press the Cancel button to exit the printer menu….
| Item | Settings (default in bold) |
|---|---|
| IP ADDRESS SETTING* | Auto, Panel, PING |
| IP* | 0.0.0.0 to 255.255.255.255 |
| SM* | 0.0.0.0 to 255.255.255.255 |
| GW* | 0.0.0.0 to 255.255.255.255 |
How do I reset my Epson TM t88v printer?
1 Answer
- Turn the printer off.
- Use a paper clip or tip of a pen to press and hold the reset on the back of the printer.
- While holding the reset button, turn the printer on.
- Continue to hold the reset button. After 5 seconds, a warning will print out. Release the reset button.
How do I find the IP address of my thermal printer?
Press and hold the feed button. Power the printer on and continue to hold the feed button. After a few seconds a settings sheet will print including the IP address of the printer. The Star TSP-700 will print two sheets; in this case, the IP address is found on the second.
Is Epson TM t88v compatible with iPad?
Connects directly to your computer with a USB cable. Connecting to your iPad is not supported at this time.
How do I set up my Epson printer to my computer?
Epson Connect Printer Setup For Windows
- Download and install the Epson Connect Printer Setup Utility.
- Agree to the End-User License Agreement, then click Next.
- Click Install, then Finish.
- Select your product, then click Next.
- Select Printer Registration, then click Next.
- Select Agree, then click Next.