What manual transmission is in a 92 F150?
RMTM5R2F-3 – M5R2 Manual Transmission for Ford 1992-1996 F150 And F250 2WD 5 Speed.
How do I know what transmission I have in my F-150?
You can find your vehicle’s transmission on your window sticker. It will be listed under Vehicle Description on top of the window sticker.
How much transmission fluid does a 1992 Ford F-150 take?
Transmission Fluid Change
| Automatic transmission fluid type | |
|---|---|
| 1988-1992 4-speed | SAE 80W gear lube |
| 1993 on 4-speed and 5-speed | MERCON |
| Automatic transmission (total capacity with toque convertor) | |
| C4 | 9.6 to 10.0 qts |
How does a E4OD transmission work?
History of the Ford E4OD and 4R100 The extra overdrive gear allows the vehicle to achieve a higher cruising speed with a lower engine speed. This is because the transmission ratio makes the output shaft spin faster than the input shaft from the engine. It improves overall performance and leads to better fuel economy.
How do I know if I have a E4OD transmission?
To determine which is used in your vehicle, follow these guidelines:
- If the shifter has a P-R-N-OD-D-1 pattern, the transmission must be an AOD (applicable to 1980-1993 vehicles).
- If a 1989-1993 truck has an Overdrive Cancel Switch and a P-R-N-OD-2-1 shifter pattern, then it is equipped with an E4OD transmission.
How do I find out my transmission type?
Open the driver’s side door and look for a white placard with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details.
How much does it cost to rebuild a Ford F-150 transmission?
RepairSmith offers upfront and competitive pricing. The average cost for Ford F-150 Transmission Rebuild is $3243.
What kind of fluid goes in a Ford manual transmission?
Description. Motorcraft Full Synthetic Manual Transmission Fluid is a premium-quality SAE 75W-90 gear oil recommended by Ford Motor Company meeting warranty requirements.
What kind of oil does a 1992 Ford F-150 take?
Ford F-150 Custom / XL / XLT Lariat 4.9L / 5.0L / 5.8L 1992, SAE 5W-30 Full Synthetic Motor Oil, 1 Quart by Motorcraft®. This product is made of high-quality components to meet and exceed strict quality requirements.
What years did Ford use the E4OD transmission?
The E4OD was introduced in 1989 and used in both light and heavy duty applications. The E4OD has four forward speeds and electronic shift controls replacing the hydraulic governor control mechanism of the C6. The valve body was completely redesigned from the C6.
Is the Ford E40D a good transmission?
The truck’s new TCI MaXimizer E40D transmission (along with its high-torque converter) performs flawlessly, with smooth and firm upshifts and distinct downshifting when coming to a stop. The truck handles the West Coast freeways and grades at 65-70 mph without any problems.
What controls shifting on a E4OD?
Shifts are done electronically with solenoids and fluid pressure control systems which engage the optimum gear based on the input from a transmission controller.
How much does it cost to rebuild an E40D?
between $1,800-$2,800
It took Phil about six hours to handle our E4OD heavy-duty overhaul. Gary says the cost of such a rebuild would typically run between $1,800-$2,800 depending on the performance level of the rebuild, the year, and condition of the original parts.
Are all E4OD transmissions interchangeable?
While almost identical on the exterior, not all parts are interchangeable between these two units, so care must be exercised to insure compatibility. Unlike the E4OD, these units have a dedicated output shaft speed sensor located towards the rear of the transmission.
Where can I find the transmission part number?
4) Look Under the Hood or on the Transmission Oil Pan Using a good flashlight, look for part numbers stamped into the transmission pan or the transmission itself. Your local auto part store or dealer will be able to cross-reference the numbers to determine the kind of transmission the part belongs to.