Why is my Braeburn thermostat not working?
To fix the Braeburn thermostat not cooling, reset the thermostat by pressing the RESET button. Then, check if your Thermostat’s AC filters need replacement. Also, ensure that there are no coolant leaks. Finally, check if your Braeburn thermostat is receiving adequate power to fix the cooling issue.
Where is the reset button on a Braeburn thermostat?
To reset a Braeburn thermostat, press the RESET button located inside a small hole on the front side of the thermostat using a toothpick, a paper clip, or a pin.
Where do I find my Braeburn model number?
You will find the model number of your Braeburn thermostat on the back of the device. Simply remove the faceplate so you can read off the model number on the label.
How do I reprogram my Braeburn thermostat?
How can I program my Braeburn thermostat?
- Press the ‘prog’ button on your thermostat.
- Press the system button until it lands on the cool or heat setting.
- Next, select the day/time button to create settings for each day.
- Use the arrow buttons to adjust the time and temperature you need.
When should I reset my thermostat?
Any time you are having an issue with heating and cooling units, such as after a sudden power failure or after your children have had ‘control’ of the system while you’ve been away, resetting the thermostat should be the first thing you try when attempting to rectify HVAC system issues.
Does Braeburn thermostat need batteries?
Some Braeburn thermostats require 2 “AA” alkaline batteries while many newer models can be battery operated, directly wired (hardwired) or both.
What causes thermostat to stop working?
If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover. If it looks dirty inside, use canned air or a soft artist brush to clean away accumulated grime that may be affecting its functionality. Then look for issues like loose wiring or terminal screws and tighten them up.
How do I override my Braeburn thermostat?
You can temporarily override the program at any time by pressing either the UP or DOWN arrow button for about 2 seconds until the display flashes once. At that time you can use the UP or DOWN buttons freely to change the desired set point temperature.
How do I know if my Braeburn thermostat is working?
If the fan runs continuously, put the unit into auto mode on the thermostat panel so that it only runs during the heating or cooling mode. If it runs intermittently, then it more than likely is in recirculate mode and is pushing hot or cold air in the home around the house while the unit is off.