Menu Close

Why is my Epson printer not printing when the ink tank is full?

Why is my Epson printer not printing when the ink tank is full?

Why is my Epson printer not printing when the ink is full? It is possible that the cartridge is old and the printer won’t recognize it. Also, printheads clog because nozzles get blocked by either air or ink. You can de-clog them using a pin or window cleaner.

What does blinking light on Epson printer mean?

If you just replaced an ink cartridge and the power light is still flashing after 3 minutes, the cartridge may be installed incorrectly. Reinstall the ink cartridge. Paper is jammed in the product….Product Light Status.

Lights
1 WiFi
2 power
3 paper
4 ink

How do I fix my Epson ink cartridge Cannot detect?

If the ink not recognized message is on the screen, select the option to replace the ink cartridge and press the OK button. If the ink not recognized message is not on the screen, press the home button, if necessary, and select Setup > Maintenance > Ink Cartridge Replacement.

Why is the light flashing on my printer?

Power light blinks fast The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state.

What do the lights on my printer mean?

There are two indicator lights on the printer: the Status light and the Charging light. Each indicator light shows the status of the printer as described below. Status indicator light: A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred.

What does the orange light on an Epson printer mean?

Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it. An ink cartridge is expended or not installed correctly. Replace or reinstall the cartridge.

How do I fix the orange light on my printer?

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Posted in Lifehacks